JLG 260MRT Parts Manual - Manual (Page 89)

3121802 260MRT 4-11
SECTION 4 PLATFORM
FIGURE 4-3. CONSOLE BOX ASSEMBLY
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. CONSOLE BOX ASSEMBLY OPTIONS:
0270198 Ref. Diesel Machines without Leveling Jacks (Prior to
S/N 0200141689) J
1810017 Ref. Diesel Machines without Leveling Jacks (S/N 0200141689 to
Present) B
0270451 Ref. Diesel Machines with Leveling Jacks E
1810001 Ref. Diesel Machines with Auto Level Leveling Jacks B
1 0140011 1 Alarm
2 0181847 1 Angle, Latch
3 0610135 1 Board, P/C Display
4 0641404 4 Bolt 1/4in-20NC x 1/2in
5 0861357 1 Box, Console
6 0902499 1 Bracket, D-Ring
7 1 Drive/Steer Controller Assembly Options:
1600308 Prior to S/N 0200142023 (See Figure 4-4 for Breakdown)
1600403 S/N 0200142023 to Present (See Figure 4-5 for Breakdown)
8 Use Item 11C 1 Decal - Display Board (Prior to S/N 0200120329 was p/n
1704624)
Note: Item 11C will need trimmed to fit machines built Prior
to S/N 0200112399.
9 1704589 1 Decal - Glow Plug
10 2560141 1 Thumbscrew
11 1 Nameplate Options:
3252695 Prior to S/N 0200112399
1705711 S/N 0200112399 to Present (Shown)
11 A/R Nameplate Options:
11A 3252695 Prior to S/N 0200112399 (1 Pc Decal)
11B Use 11D & 11E S/N 0200112399 to S/N 0200120329 (1 Pc Decal)
11C S/N 0200120329 to Present Options (2 Pc Decal):
11D 1705947 1 Machines without Generator (Top Half)
11E 1705948 1 Machines without Generator (Bottom Half)
12 3310601 4 Nut #6-32NC
13 A/R Component Options:
3520080 4 Machines without Leveling Jacks (Plug)
4360387 4 Machines with Leveling Jacks (Push Button Switch)
4360387 1 Machines with Auto Level Leveling Jacks (Push Button
Switch)
3520080 3 Machines with Auto Level Leveling Jacks (Plug)
14 Not Used
15 3900178 4 Screw, Plastite #10-32NC x 1/2in
16 3900265 10 Screw, Self-Tapping #8-18 x 3/4in
17 4060802 2 Guard, Switch
18 4360387 A/R Switch, Push Button Options:
4 Leveling Jacks
1 Auto Level Leveling Jacks
19 4360475 1 Switch, Emergency Stop
7020175 1 Ring, Sealing
19A 7020176 1 Block, Contact