JLG 260MRT Parts Manual - Manual (Page 25)

3121802 260MRT 1-19
SECTION 1 FRAME
FIGURE 1-6. FRAME MOUNTED COMPONENTS INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
0259805 Ref. ELEVATION SWITCH INSTALLATION E
1 0100011 A/R Compound, Locking
2 0641610 2 Bolt 3/8in-16NC x 1-1/4in
3 0902609 1 Bracket, Limit Switch Mounting
4 4922630 1 Harness, Elevation (See Section 7 for Breakdown)
5 1100110 1 Cam, High Drive Limit Switch
6 3310801 2 Nut #8-32NC
7 3311605 2 Locknut 3/8in-16NC
8 3930820 2 Screw, Machine #8-32NC x 1-1/4in
9 3951603 2 Setscrew 3/8in x 3/8in
10 to 12 Not Used
13 4711600 2 Flatwasher 3/8in Thin
14 4750800 2 Flatwasher #8 Regular
Ref. ELEVATION SWITCH INSTALLATION (AUTO LEVEL LEVELING
JACKS)
0274337 Ref. All Machines except Machines with Level at 6° Slope A
1001118682 Ref. Machines with Level at 6° Slope (Australian Spec Option) (Not
Shown) A
101 0100011 A/R Compound, Locking
102 0641512 2 Bolt 5/16in-18NC x 1-1/2in
103 0641610 2 Bolt 3/8in-16NC x 1-1/4in
104 1100110 1 Cam, High Drive Limit Switch
105 3200453 1 Mount, Proximity Switch
106 3300474 2 Locknut
107 3310801 2 Nut #8-32NC
108 3311505 2 Locknut 5/16in-18NC
109 3311605 2 Locknut 3/8in-16NC
110 3930334 2 Screw, Panhead
111 3930820 2 Screw, Machine #8-32NC x 1-1/4in
112 3951603 2 Setscrew 3/8in x 3/8in
113 A/R Bracket, Switch Options:
4341007 1 Bracket - 6.75in H x 6in W (17cm H x 15.24 cm W) (All
Machines except Machines with Level at 6° Slope)
A/R Brackets for Machines with Level at 6° Slope (Australian Spec
Option) (Requires Both Brackets) (Not Shown)
0902609 1 Bracket, - 8in H x 5in W (20.3cm H x 12.7 cm W)
4340939 1 Bracket - 8.5in H x 4in W (21.6cm H x 10 cm W)
114 4360502 1 Switch, Proximity Sensor
115 4711500 4 Flatwasher 5/16in Thin
116 4711600 2 Flatwasher 3/8in Thin
117 4750800 2 Flatwasher #8 Regular
118 4922630 1 Cable, 18/2 & Limit Switch
1060680 9ft/2.7m Cable, 18/2
4360548 1 Switch, Limit
4460968 1 Connector, Strain Relief
4460465 2 Socket, Female
119 4923137 1 Harness, Proximity Switch (See Section 7 for Breakdown)