JLG 20VP (3120727) Operator Manual - Manual (Page 41)

SECTION 5 - OPTIONAL EQUIPMENT
3120727 – JLG Lift – 5-1
SECTION 5. OPTIONAL EQUIPMENT
5.1 OPTIONAL EQUIPMENT
The VP Series models are available with the following
optional equipment:
26" x 28" Quick-Change Platform
The 26" long by 28" wide platform features a gull wing
gate and is attached to the mast using the quick change
mount.
25" x 22" Quick-Change Platform
The 25" long by 22" wide platform features a gull wing
gate and is attached to the mast using the quick change
mount.
26" x 50" Quick-Change - ExtendiblePlatform
(See Section 5-2, Extendible Platform Operation)
PLEASE NOTE THAT THE OPTIONAL EXTENDIBLE PLATFORM IS
ONLY AVAILABLE FOR THE 20VP AND CAN ONLY BE MOUNTED
ON THAT MODEL.
The 26" long x 50" wide extendible platform features a gull
wing gate and is attached to the mast using the quick
change mount.
25" x 26" Step-in Molded Platformw/Swing-
up Gate
This fixed mount platform is also available, the platform
features a tough molded shell base and sides mounted to
a welded steel frame. This step-in platform has a swing-up
gate for easy entry.
Tool Tray
The tool tray is attached to the top rail of the platform
allowing for quick access to hand tools or other small
items placed in the tray.
Fluorescent Tube Caddy
The fluorescent tube caddy is attached to the top rail of
the platform allowing for convienent handling when
replacing fluorescent tubes.
Laser Positioning Light
The laser positioning light attaches to the platform railing
and when powered on projects a laser dot on any surface
above the machine. This allows for better positioning of
the machine under a work area, before raising the
machine platform.
Lifting Hook
The optional lifting hook is mounted at the top rear of the
first mast section. The hook is used to lift the machine up
or down to another level.
Amber Beacon Light
The revolving amber beacon flashes any time the machine
power is turned on, this helps alert others of the presence
and operation of the machine.
Motion Alarm
The motion alarm emits a very audible beeping sound and
can be set to activate (beep) either when the machine is
being driven or if the platform is in motion. It can also be
set to activate (beep) for both functions.
Horn
The horn is activated by the horn pad on the platform con-
troller box. It can be used at the descretion of the operator
to alert other personnel to the presence of the machine.
Travel/Storage Cover
This cover is custom fit to all VP Series machines. It covers
the complete machine from the top of the mast down to
the base wheels. It is made of heavy, durable, washable
black vinyl material.
UL-EE Rating (20VP Model Only)
The 20VP machine is available with optional protective
features designed into the electrical system, which allow it
to comply with the Underwriters Laboratory - EE electrical
rating.