JLG 4017RS Operator Manual - Manual (Page 124)

Section 7 - Lubrication and Maintenance
7-14 31200938
Engine Oil
A. Engine Oil Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open engine cover.
3. Remove dipstick (1) and check oil mark. The oil should be between the full (2) and
add (3) marks within the crosshatched area of the dipstick.
4. Replace dipstick.
5. If oil is low, remove oil fill cap (4) and add oil to bring oil up to the full mark in the
crosshatch area.
6. Replace oil fill cap.
7. Close and secure engine cover.
10
OW0970
OW1020
OZ3990
ADD
3
2
1
4