Engine cooling system, Engine cooling system -15 – JLG 4017RS Operator Manual User Manual
Page 125
Advertising
Section 7 - Lubrication and Maintenance
7-15
31200938
Engine Cooling System
A. Engine Coolant Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open engine cover.
3. Check coolant level in surge tank (1). Coolant should be between the Min and Max
(2) marks.
4. If coolant is low, allow fluid to cool.
5. Remove surge tank cap (3) slowly. Add coolant as required.
6. Replace surge tank cap.
7. Close and secure engine cover.
10
OW0970
OW1070
OZ4000
1
3
2
Advertising
This manual is related to the following products: