JLG 4017RS Operator Manual - Manual (Page 43)

Section 3 - Controls and Indicators
3-7 31200938
Park Brake
The park brake lever (1) controls the application and release of the park brake.
• Pull lever back to apply park brake.
• 3614RS - Squeeze release (2) and push lever forward to release park brake.
4017RS - Lift detent ring (3) and push lever forward to release park brake.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow “Shut-Down Procedure” on page 4-3.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake lever to "ON" position,
lower boom to ground and stop engine before leaving cab.
WARNING
CRUSH HAZARD. Applying park brake while traveling will cause unit to stop abruptly
and could cause load loss. To stop the machine in an emergency, apply the park brake.
OZ4090
1
2
3
1
4017RS 3614RS