JLG 4017RS Operator Manual - Manual (Page 44)

Section 3 - Controls and Indicators
3-8 31200938
Transmission Control Lever (if equipped)
Direction of Travel Selection
Transmission control lever (1) engages forward or reverse travel.
• Push lever forward for forward travel; pull lever rearward for reverse travel. Move lever
to centered position for neutral.
• Forward or reverse travel can be selected while in any gear.
• When traveling in reverse, the back-up alarm will automatically sound.
• Drive in reverse and turn only at slow rates of speed.
• If clutch lock is activated do not increase engine speed with the transmission in
forward or reverse and the service brake depressed in an attempt to get quicker
hydraulic performances. This could cause unexpected machine movement.
WARNING
TIP OVER/CRUSH HAZARD. Bring telehandler to a complete stop before shifting
transmission control lever. A sudden change in direction of travel could reduce
stability and/or cause load to shift or fall.
OZ4131
F
N
R
1