JLG 4017RS Operator Manual - Manual (Page 56)

Section 3 - Controls and Indicators
3-20 31200938
Console Switches
1. Joystick Function Switch: On/Off switch. All joystick functions are enabled when on.
2. LSI Override Switch: Momentarily disables the automatic function cut-out. Depress
and hold up to 30 seconds while operating joystick to momentarily disable the
automatic function cut-out.
3. Rear Wiper Switch: On/Off switch.
4. Roof Wiper Switch (if equipped): On/Off switch.
5. Hazards Lights Switch: On/Off switch.
6. Driving Lights Switch (if equipped): On/Off switch.
7. Fog Lights Switch (if equipped): On/Off switch.
8. Beacon Light Switch (if equipped): On/Off switch. Place magnetic base of beacon on
cab roof. Power supplied by 12V receptacle at rear left of cab roof.
9. Front and Rear Cab Work Lights Switch (if equipped): On/Off switch.
10. Steer Select Switch: Three positions: 4-wheel circle steer, 4-wheel crab steer and 2-
wheel steer. See page 3-24.
11. High Beam and Turn Signal Indicators: Illuminates when high beams or turn signals
are active.
12. Power Outlet: 12V receptacle.
OZ4150
1 2 3 4 5 6 7 8 9
10
11
12
13
15 16
14