Seat belt, Seat belt -27 – JLG 4017RS Operator Manual User Manual
Page 63
Advertising
Section 3 - Controls and Indicators
3-27
31200938
Seat Belt
Fasten seat belt as follows:
1. Grasp both free ends of the belt making certain that belt webbing is not twisted or
entangled.
2. With back straight in the seat, couple the retractable end (male end) of the belt into
the receptacle (buckle) end of the belt.
3. With belt buckle positioned as low on the body as possible, pull the retractable end
of the belt away from the buckle until it is tight across the lap.
4. To release belt latch, depress red button on the buckle and pull free end from buckle.
OH20912
Advertising
This manual is related to the following products: