Hydraulic operated attachment, Hydraulic operated attachment -16 – JLG 4017RS Operator Manual User Manual
Page 96
Advertising
Section 5 - Attachments
5-16
31200938
Hydraulic Operated Attachment
1. Install attachment (see page 5-10, 5-12 or 5-14).
2. Lower attachment to ground.
3. Quickly depress and release the continuous auxiliary hydraulics switch (1) twice.
Immediately depress again and hold at least one second to relieve pressure at both
auxiliary fittings (2).
Note: Depressing of the continuous auxiliary hydraulics switch three times must be
accomplished within two seconds.
4. Perform “Shut-Down Procedure” on page 4-3.
5. Connect attachment hoses to both auxiliary fittings.
OZ4411
2
OZ4200
1
Advertising
This manual is related to the following products: