JLG 4017RS Operator Manual - Manual (Page 99)

Section 5 - Attachments
5-19 31200938
Carriage w/Forks
Use Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/
Fork Capacity” on page 5-4.
The joystick (1) controls movement of the boom.
The attachment tilt roller switch (2) controls carriage tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-10.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could damage forks
or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
OZ0770
O 4210 Z
1
2