JLG 40RTS Service Manual - Manual (Page 10)

SECTION 1 - SPECIFICATIONS
1-2 – JLG Sizzor – 3120826
1.3 PERFORMANCE DATA
Travel Speed
Gasoline 2 W/D - 8-10 seconds per 15 m (50 ft.)
Gasoline 4 W/D - 12-14 seconds per 15 m (50 ft.)
Diesel 2 W/D - 9-11 seconds per 15 m (50 ft.)
Diesel 4 W/D - 14-16 seconds per 15 m (50 ft.)
Gradeability
2 Wheel Drive - 25% (14°)
4 Wheel Drive - 45% (24°)
Turning Radius (Outside)
2 Wheel Steer - 5.51 m (18 ft.1 in.)
4 Wheel Steer - 3.43 m (11 ft. 3 in.)
Lift Speed
Lift up - 25RTS - 50-55 seconds
33RTS - 53-58 seconds
40RTS - 58-63 seconds
Lift down - All models - 30-40 seconds
Platform Capacity - Fixed Platform
25RTS - 910 kg (2,000 lb.)
33RTS - 680 kg (1,500 lb.)
40RTS - 455 kg (1,000 lb.)
Platform Capacity - Mechanical Platform
Extension with Deck Extended
25RTS - Main Deck - 570 kg (1,250 lb)
Extension -230 kg (500 lb)
33RTS - Main Deck - 340 kg (750 lb)
Extension - 230 kg (500 lb)
40RTS - Main Deck - 115 kg (250 lb)
Extension - 230 kg (500 lb)
Platform Capacity - Mechanical Platform
Extension with Deck Retracted
25RTS - 795 kg (1,750 lb)
33RTS - 570 kg (1,250 lb)
40RTS - 340 kg (750 lb)
Machine Weight
25RTS - Approx. 3,445 kg (7,600 lb.)
33RTS - Approx. 3,720 kg (8,200 lb.)
40RTS - Approx. 4,175 kg (9,200 lb.)
Machine Height (Platform Lowered)
25RTS - 2.6 m (103.5 in.)
33RTS - 2.8 m (111.5 in.)
40RTS - 3.0 m (119.5 in.)
Machine Length
3.78 m (12 ft. 5 in.)
Machine Width
All Models - Standard Tires - 2.29 m (7 ft. 6 in.)
All Models - Optional Tires - 2.31 m (7 ft. 7 in.)
1.4 LUBRICATION
NOTE: Hydraulic oils must have anti-wear qualities at least
to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobilfluid 424
hydraulic oil, which has an SAE viscosity index of
152.
NOTE: When temperatures remain consistently below -7° C
( 20° F ), JLG Industries recommends the use of
Mobil DTE11.
Some machines may be specially equipped with Mobil
EAL224H biodegradable and non-toxic hydraulic oil. This
oil is vegetable oil based and possesses the same anti-
wear and rust protection characteristics as mineral oils,
but will not adversely affect ground water or the environ-
ment when spilled or leaked in small amounts. Mobil
EAL224H has a viscosity of 34 cST at 40° C and a viscosity
index of 213. The operating range of this oil is -18° C to
+83° C
Table 1-1. Hydraulic Oil
HYDRAULIC SYSTEM OPERATING
TEMPERATURE RANGE
SAE VISCOSITY GRADE
0 to +23 degrees F
(-18 to -5 degrees C)
10W
0 to +210 degrees F
(-18 to +100 degrees C)
10W-20,10W-30
+50 to +210 degrees F
(+10 to +100 degrees C)
20W-20