JLG 40RTS Service Manual - Manual (Page 9)

SECTION 1 - SPECIFICATIONS
3120826 – JLG Sizzor – 1-1
SECTION 1. SPECIFICATIONS
1.1 CAPACITIES
Hydraulic Oil Tank
Approximately 64.4 liters (17 U.S. gallons) w/15% air
space
Hydraulic System (Including Tank)
Approximately 75.7 liters (20 U.S. gallons)
Fuel Tank
Approximately 56.8 liters (15 U.S. gallons)
Engine Crankcase
Gasoline Engine
3.2 liters (3.4 quarts) w/filter
2.7 liters (2.9 quarts) w/o filter
Diesel Engine
6.5 liters (6.9 quarts) w/filter
6.0 liters (6.3 quarts) w/o filter
Coolant Capacity (Gasoline Engine)
13.2 liters (3.5 U.S. gallons)
1.2 COMPONENT DATA
Gasoline Engine
Manufacturer - Ford
Displacement - 1.3 liter
Low RPM - 2200
High RPM - 3000
Alternator - 55 Amp external
Battery - 85 Amphour, 550 Cold Cranking Amps
Fuel Consumption
Low RPM - 6.7 lph (1.8 gph)
High RPM - 11.4 lph (3.0 gph)
Horsepower - 40 @ 3000 RPM
Diesel Engine
Manufacturer - Deutz
Low RPM - 2000
High RPM - 3000
Battery - 85 Amphour, 550 Cold Cranking Amps
Fuel Consumption
Low RPM - 4.9 lph (1.3 gph)
High RPM - 6.0 lph (1.6 gph)
Horsepower - 27 @ 2800 RPM
Drive/Steer System
Toe-In - Adjust to 6.4 mm (1/4 in.) overall
Drive Motor - 6.3 cm[3] (2.48 in.[3]) displacement
Drive Hub (2WD Rear) - Hub ratio 35:1
Drive Hub (4WD Rear) - Hub ratio 24:1
Drive Hub/Brake (4WD Front) - Hub ratio 24:1; brake -
spring applied, hydraulic release, release pressure - 11
bar (160 psi) initial, 13 bar (190 psi) full.
Drive Brake (2WD/4WD Rear) - Spring applied, hydraulic
release, release pressure - 10 bar (150 psi) initial, 12 bar
(170 psi) full.
Hydraulic Filter - Inline
Return - Bypass Type
25 Microns Nominal
Tires
Standard - 31 - 15.5 x 15 NHS, 8 ply, pneumatic, inflate to
4 bar (60 psi).
Optional - 12 - 16.5 NHS, 6 ply, foam filled
Optional - 12 - 16.5 NHS, 6 ply, pneumatic, inflate to 4 bar
(60 psi).
NOTE: All wheel lugs must be torqued at 90 ft lbs. every 50
hours.