JLG 660SJ ANSI Service Manual - Manual (Page 227)

SECTION 6 - JLG CONTROL SYSTEM
3120718 – JLG Lift – 6-13
6.8 MACHINE PERSONALITY SETTINGS NOTE: Personality settings can be adjusted within the
adjustment range in order to achieve optimum
machine performance.
Table 6-1. Personality Ranges/Defaults
FUNCTION PERSONALITY RANGE DEFAULTS - 600S DEFAULTS - 600A
DRIVE ACCELeration 0.1s to 5.0s 2.0 2.0
DECELeration 0.1s to 3.0s 2.0 2.0
Forward MINimum speed 0 to 35% 4 4
Forward MAXimum speed 0 to 100% 35 35
REVerse MINimum speed 0 to 35% 4 4
REVerse MAXimum speed 0 to 100% 35 22
ELEVATED MAXimum speed 0 to 50% 15 10
CREEP MAXimum speed 0 to 50% 25 25
Engine RPM 800 to 2900 1800 1800
TOWER LIFT ACCELeration 0.1 to 5.0 N/A 1.0
DECELeration 0.1 to 3.0 N/A 0.5
MlNimum UP speed 0 to 60% N/A 50
MAXimum UP speed 0 to 100% N/A 100
MINimum DOWN speed 0 to 60% N/A 50
MAXimum DOWN speed 0 to 100% N/A 100
Engine RPM 800 to 2900 N/A 1800
UPPER LIFT ACCELeration 0.1 to 5.0 2.0 2.0
DECELeration 0.1 to 3.0 1.0 0.7
MlNimum UP speed 0 to 60% 40 30
MAXimum UP speed 0 to 100% 80 55
CREEP Maximum UP speed 0 to 65% 55 55
MINimum DOWN speed 0 to 60% 40 40
MAXimum DOWN speed 0 to 100% 70 65
CREEP maximum DOWN speed 0 to 75% 55 55
Engine RPM 800 to 2900 1800 1800