Continental tmd27 engine, Hydraulic oil, Continental tmd27 engine -6 hydraulic oil -6 – JLG 660SJ ANSI Service Manual User Manual

Page 24: Hydraulic oil -6, Mobil dte 13m specs -6

Advertising
background image

SECTION 1 - SPECIFICATIONS

1-6

– JLG Lift –

3120718

NOTE: Crankcase oil should be MIL-L2104B/MIL-L2104C or

have properties of API classification CC/CD grades.

Continental TMD27 Engine

Single Viscosity Oils (CC-CD).

Hydraulic Oil

NOTE: Hydraulic oils must have anti-wear qualities at least

to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobilfluid 424
hydraulic oil, which has an SAE viscosity index of
152.

NOTE: When temperatures remain below 20° F (-7 degrees

C), JLG Industries recommends the use of Mobil
DTE 13M.

Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Kendall Hyken
052 or Mobilfluid 424 is desired, contact JLG Industries for
proper recommendations.

When Outside

Temperature is

Consistently

Use SAE Viscosity Number

-40°F. to +75°F. (-40°C. to

+24°C.)

*5W-30 (Synthetic)

-15°F. to +70°F. (-26°C. to

+21°C.)

10W-30

-15°F. to +85°F. (-26°C. to

+30°C.)

10W-40

Above -5°F. (-21°C.)

15W-40

-5°F. to +75°F. (-21°C. to

+24°C.)

15W-30

*This viscosity can be used at colder temperatures with
engine oil preheating.

When Outside

Temperature is

Consistently

Use SAE Viscosity Number

+32°F. to +77°F. (+0°C. to

+25°C.)

20

Above +77°F. (+25°C.)

30

Below +32°F. (+0°C.)

10W

Multi Viscosity Oil (CC-CD)

*Not recommended for severe service, including high RPM
operation

When Outside

Temperature is

Consistently

Use SAE Viscosity Number

Below +32°F. (+0°C.)

10W-30

Table 1-3. Hydraulic Oil

HYDRAULIC SYSTEM

OPERATING

TEMPERATURE RANGE

SAE VISCOSITY GRADE

+0° to +180° F (-18° C to

+83° C)

10W

+0° F to +210° F (-18° C to

+99° C)

10W-20, 10W-30

+50° F to +210° F (+10° C to

+210° C)

20W-20

Table 1-4. Mobil DTE 13M Specs

ISO Viscosity Grade

#32

Specific Gravity

0.877

Pour Point, Max

-40˚F (-40˚C)

Flash Point, Min.

330˚F (166˚C)

Viscosity

at 40° C

33cSt

at 100° C

6.6 cSt

at 100° F

169 SUS

at 210° F

48 SUS

cp at -20° F

6,200

Viscosity Index

140

Advertising