Voltage measurement (dc) -2, Resistance measurement -2, Voltage measurement resistance measurement – JLG 260MRT Service Manual User Manual
Page 68
Advertising
SECTION 3 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
3-2
– JLG Lift –
3121801
Voltage Measurement
Resistance Measurement
Figure 3-1. Voltage Measurement (DC)
Figure 3-2. Resistance Measurement
• If meter is not auto ranging, set it to the correct range
(See multimeter’s operation manual)
• Use firm contact with meter leads
• First test meter and leads by touching leads together.
Resistance should read a short circuit (very low resis-
tance)
• Circuit power must be turned OFF before testing
resistance
• Disconnect component from circuit before testing
• If meter is not auto ranging, set it to the correct range
(See multimeter’s operation manual)
• Use firm contact with meter leads
Advertising