JLG 9MP Service Manual - Manual (Page 26)

SECTION 3 - BASE COMPONENTS
3-2 – JLG Lift – 3121163
3.2 PLATFORM DESCENT - BEACON AND
ALARM
Descent Beacon - Remove/Install
Descent Alarm - Remove/Install
3.3 WHEEL ASSEMBLIES
Front Caster Wheel - Remove/Install
Rear Locking Caster Wheel - Remove/Install
1. Beacon Assembly 3. Rout wires through hole in
2. Mounting Screws base frame
1. Descent Alarm Assembly 3. Wire Terminals
2. Mounting Screws
Note: Located inside base frame, under the platform.
1
2
3
2
1
2
3
1. Caster Wheel Assembly 3. Base Frame (Front Member)
2. Hex Head Cap Screws
Note: Left front caster wheel shown.
1. Rear Locking Caster Wheel 3. Base Frame Caster
2. Hex Head Cap Screws Mounting Pad
Note: Right rear locking caster shown.
1
2
3
1
2
3