2 control cover installation, Battery/battery charger cover - remove/ install, Ground control station cover - remove/ install – JLG 9MP Service Manual User Manual
Page 32: Control cover installation -2
Advertising
SECTION 4 - CONTROL COMPONENTS
4-2
– JLG Lift –
3121163
4.2
CONTROL COVER INSTALLATION
Battery/Battery Charger Cover - Remove/
Install
Ground Control Station Cover - Remove/
Install
1. Cover
3. Attach Screws and Washers
2. Slide Tab Over
4. Charger/Rear Cover Mounting
Mounting Plate. (a)
Plate
Machine shown with mast and platform removed for illustrative
purposes only.
Note: (a) After removing attach screws, lift cover and pull out to
remove.
1
2
4
3
1. Ground Station Cover 2. Attach Screws and Washers
Machine shown with platform removed for illustrative purposes
only.
Advertising