4 ground station - servicing, Ground station - servicing -4 – JLG 9MP Service Manual User Manual
Page 34
SECTION 4 - CONTROL COMPONENTS
4-4
– JLG Lift –
3121163
4.4
GROUND STATION - SERVICING
Ground Control Box - Removal/Installation
• Remove the ground control station cover, see Section 4.2.
1. Ground Control Box (a)
2. Pump/Motor Mount
3. Mounting Screws, Washers and Nuts (b)
Notes: (a) Unscrew front cover to access nuts and washers.
(b) Apply Loctite #242 to mounting screw threads before tightening.
Ground Control Box - Disassembly/Assembly
1. Cover
4. Key Switch Nut
7. Stop Switch Gasket
10. Stop Switch Release
13. Cover Screw Seal
2. Base
5. Key Switch
8. Stop Switch Nut
11. Release Lever Cover
3. Key Set
6. Emergency Stop Button
9. Stop Switch
12. Cover Screw
Note: See wiring schematic in Section 6 of this manual for correct wiring connections.
1
2
3
1
2
4
3
5
6
7
8
9
10
11
12
13