JLG G9-43A (9151-4003) Operator Manual - Manual (Page 48)

13.8
WARNING !
Do not use the Personnel Work
Platform until you study &
understand the “ Capacity Chart”.
If your handler does not have the
correct “Personnel Work Platform
Capacity Chart”, ask your
supervisor to get one before using
the attachment.
WARNING !
Do not use a boom mounted winch
while the platform is mounted to the
boom.
Personnel Work Platform
The material handler operator and personnel in the platform must read
and understand the separate personnel work platform manual, included
with the attachment, prior to using the platform.
Capacity:
The Gradall personnel work platform is designed to carry a maximum of 3
occupants. The load includes personnel, materials, tools, etc. The maximum
capacity of your work platform is based on specific model material handler/
work platform combination. To determine maximum load capacity for given
operating ranges, consult the proper load capacity chart (furnished with
platform) for the material handler and work platform in use. If your handler
is not equipped with the proper personnel work platform capacity
chart, get one before using the attachment.
Installation Procedure:
1. Remove carriage/fork combination or other attachment from boom head.
See page 13.1.
Operation:
• Gradall Personnel Work Platforms are approved for use only on Gradall Material
Handlers equipped with the proper platform capacity chart.
• When lifting personnel, use only a Gradall manufactured personnel work
platform. No other platform is approved for use on Gradall Material Handlers.