6 lubrication – JLG 150HAX Service Manual User Manual

Page 12

Advertising
background image

SECTION 1 - SPECIFICATIONS

1-2

– JLG Lift –

3120817

1.6

LUBRICATION

.

NOTE: Hydraulic oils must have anti-wear qualities at least

to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobilfluid 424
hydraulic oil, which has an SAE viscosity index of
152 .

NOTE: When temperatures remain consistently below 20

degrees F (-7 degrees C.), JLG Industries recom-
mends the use of Mobil DTE11.

NOTE: Aside from JLG recommendations, it is not advisable

to mix oils of different brands or types, as they may
not contain the same required additives or be of
comparable viscosities. If use of hydraulic oil other
than Mobilfluid 424 is desired, contact JLG Indus-
tries for proper recommendations.

Table 1-6.Hydraulic Oil

Hydraulic System Operating

Temperature Range

SAE Viscosity

Grade

0° to +23° F(-18° to -5° C)

10W

0° to +210° F(-18° to +100° C)

10W-20, 10W-30

+50° to +210° F(+10° to +99° C)

20W-20

Table 1-7. Mobilfluid 424 Specs

SAE Grade

10W30

Gravity, API

29.0

Density, Lb/Gal. 60°F

7.35

Pour Point, Max

-46°F (-43°C)

Flash Point, Min.

442°F (228°C)

Viscosity

Brookfield, cP at -18°C

2700

at 40° C

55 cSt

at 100° C

9.3 cSt

Viscosity Index

152

Table 1-8. Mobil EAL 224 H Specs

Type

Biodegradable Vegetable Oil

ISO Viscosity Grade

32/46

Specific Gravity

.922

Pour Point, Max

-25°F (-32°C)

Flash Point, Min.

428°F (220°C)

Weight

7.64 lb. per gal.

(0.9 kg per liter)

Viscosity

at 104° F (40° C)

37 cSt

at 212° F (100° C)

8.4 cSt

Viscosity Index

213

Operating Temp

0-180° F (-17 - -162°C)

Note: Must be stored above 32° F (14° C)

Table 1-9. Mobil DTE 13M Specs

ISO Viscosity Grade

#32

Specific Gravity

0.877

Pour Point, Max

-40°F (-40°C)

Flash Point, Min.

330°F (166°C)

Viscosity

at 40° C

33cSt

at 100° C

6.6 cSt

at 100° F

169 SUS

at 210° F

48 SUS

cp at -20° F

6,200

Viscosity Index

140

Table 1-10. Exxon Univis HVI 26 Specs

Specific Gravity

32.1

Pour Point

-76°F (-60°C)

Flash Point

217°F (103°C)

Viscosity

at 40° C

25.8 cSt

at 100° C

9.3 cSt

Viscosity Index

376

NOTE:

Mobil/Exxon recommends that this oil be
checked on a yearly basis for viscosity.

Advertising