JLG E300 Operator Manual - Manual (Page 24)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-4 – JLG Lift – 3121252
Pre-Start Inspection
The Pre-Start Inspection should include each of the follow-
ing:
1. Cleanliness – Check all surfaces for leakage (oil, fuel,
or battery fluid) or foreign objects. Report any leakage to
the proper maintenance personnel.
2. Structure - Inspect the machine structure for dents,
damage, weld or parent metal cracks or other discrep-
ancies.
3. Decals and Placards – Check all for cleanliness and
legibility. Make sure none of the decals and placards are
missing. Make sure all illegible decals and placards are
cleaned or replaced.
4. Operation and Safety Manuals – Make sure a copy of
the Operator and Safety Manual, AEM Safety Manual
(ANSI markets only), and ANSI Manual of Responsibili-
ties (ANSI markets only) is enclosed in the weather
resistant storage container.
5. “Walk-Around” Inspection – Refer to Figure 2-2.
6. Battery – Charge as required.
7. Hydraulic Oil – Check the hydraulic oil level. Ensure
hydraulic oil is added as required.
8. Accessories/Attachments - Reference the Operator
and Safety Manual of each attachment or accessory
installed upon the machine for specific inspection, oper-
ation, and maintenance instructions.
Parent Metal Crack Weld Crack