JLG E300 Operator Manual - Manual (Page 71)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121252 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................ 3121253
Illustrated Parts Manual ............................................ 3121254
6.2 OPERATING SPECIFICATIONS AND
PERFORMANCE DATA
Operating Specifications
Table 6-1. Operating specifications - E300AJ
Capacity: Unrestricted: ANSI 500 lbs. (227 kg)
Capacity: Unrestricted: CE & Australia 500 lbs. (230 kg)
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3. 25%
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-3. 5°
Drive Speed (High Drive) - 200 ft. (60.9 M) 45-50 sec
Drive Speed( Above Horz.) - 50 ft. (15.24 M) 55-68 sec ( 0.6 mph[0.9 kph] )
Gross Machine Weight - Approximate 15060 lbs. (6831 kg)
Ground Bearing Pressure - Maximum 170 psi (11.95 kg/cm 2 )
Maximum System Voltage 48V DC