JLG 110HX Service Manual User Manual
Page 132
Advertising
SECTION 3 - TROUBLESHOOTING
3-16
– JLG Lift –
3120864
Damaged wiring on control switch or auxiliary
pump.
See proper wiring diagram.
Control switch not functioning properly.
Replace switch.
Restricted or broken hydraulic line or fitting.
Clean, repair or replace line or fitting.
Pump motor solenoid not functioning properly.
Replace solenoid.
Pump motor not functioning properly.
Repair or replace motor.
Table 3-5. Hydraulic System - Troubleshooting
TROUBLE
PROBABLE CAUSE
REMEDY
Advertising
This manual is related to the following products: