IOGear GWHDMS52MB - Manual (Page 25)

2
2
25
Pairing additional receivers (Part# GWHDRX01) to the existing Transmitter (Optional)
Enter Pairing Mode for the Transmitter:
1. Unplug the power adapter from the Transmitter.
2. Press and hold down the Power button on the Transmitter.
3. Plug the power adapter back into the Transmitter.
4. Keep pressing down on the Power button until the LED indicator begins flashing orange,
indicating that the Transmitter has entered into Pairing Mode.
Enter Pairing Mode for the Receiver:
1. Unplug the power adapter from the Receiver.
2. Press and hold down the Power button on the Receiver.
3. Plug the power adapter back into the Receiver.
4. Keep pressing down on the Power button until the LED indicator begins flashing orange,
indicating that the Receiver has entered into Pairing Mode.
3
4
3
4
Note: This process MUST be repeated for every addtional receiver. A total of THREE (3)
additional receivers can be paired to the Transmitter.
Searching...
Adding GWHDMS52MB...
5. Once the Receiver enters pairing mode, the On Screen Display will show:
6. The Transmitter and Receiver will pair automatically. Once the pairing process is
completed, the Transmitter and Receiver will reboot and link to each other automatically.