IOGear GWHDMS52MB - Manual (Page 27)

27
If the Source / Status LED continues to blink green (slower than “no signal” mode); or
OSD display shows
, please check the TVs that are connected to the transmitter and
receiver support 3D video format and try to switch the 3D video format to one of the 3D
timings listed below.
Mandatory CEA 3D Video Format Timings Support
1280x720p @ 50Hz Top-and-Bottom Yes
1280x720p @ 50Hz Frame packing Yes
1280x720p @ 59.94 / 60Hz Top-and-Bottom Yes
1280x720p @ 59.94 / 60Hz Frame packing Yes
1920x1080i @ 50Hz Side-by-Side (Half) Yes
1920x1080i @ 59.94 / 60Hz Side-by-Side (Half) Yes
1920x1080p @ 23.98 / 24Hz Top-and-Bottom Yes
1920x1080p @ 23.98 / 24Hz Frame packing Yes
Audio Bit Rate Support
• Digital Audio from HDMI inputs: Up to 6Mbit/s bit-rate support.
• Support AC3 and DTS.
• 2-channel PCM: 16~24 bits audio sample with 32~96KHz sampling rate as below:
2channel PCM 32KHz 44.1KHz 48KHz 96KHz
16 bits YES YES YES YES
24 bits YES YES YES YES