IOGear GWHDMS52MB - Manual (Page 4)

4
Important Information
Please take the time to read this user manual
before using the Transmitter and Receiver.
It contains important information about
operating your Full HD video wireless kit.
Our limited warranty applies when the
product is handled properly for intended use,
in accordance with its operating instruction.
However, the warranty may be void in the
following cases:
• Repair, product modification or alteration
have been performed by unauthorized
service personnel
• Damages caused by accidents, including
but not limited to, lightning, water, fire, or
moisture
• Use of an AC adapter not compatible with
the product and its voltage rating
• The model number on the product has
been altered, deleted, removed or made
illegible
Safety Precautions
Danger: Be careful with electricity.
• Power to the units must be switched
off before any work is undertaken, such
as any AV device connection or TV
connection.
• Power outlet: To prevent electric shock,
make sure to use the appropriate
AC adapters as power supply to the
transmitter and the receiver.
• Power cord: Be sure the power cord is
routed so that it will not be stepped on or
pinched by heavy items
• Power overloading: Avoid overloading
electrical outlets or extension cords which
otherwise could result in electric shock or
fire
• Lightning: Disconnect the product from
the power source if it is left unattended for
a long period of time, and to protect the
product from lightning.
• Always disconnect the power cord from
the power outlet when you are not using
your Full HD Video wireless kit. This
reduces the risk of electric shocks or fire
• This product should not be exposed to
dripping or splashing. No object filled with
liquids, such as vases, should be placed
on the product
• Object Entry: To avoid electric shock,
never stick anything in the slots on the
case or remove the cover
• Place receiver/transmitter on a flat, hard
and stable surface
• Ventilation: Do not block the ventilation
slots on the receiver/transmitter or place
any heavy object on the top cover.
• Blocking the air flow could damage the
receiver. Arrange components so that air
can flow freely around the receiver. Ensure
that there is adequate ventilation if the
receiver is placed in a stand
• Put the receiver/transmitter in a property
ventilated area, away from direct sunlight
or any source of heat
• Water Exposure: To reduce the risk of
fire or electric shock, do not expose the
receiver/transmitter to rain or moisture.
• This is indoor solution
• Our company has the right to modify this
document without any notice
Warning
Warning!
RISK OF
ELECTRICAL
SHOCK
DO NOT OPEN !
TO REDUCE THE RISK OF ELECTRICAL
SHOCK. DO NOT REMOVE THE COVER
NO USER-SERVICEABLE PARTS ARE INSIDE
REFER SERVICING TO QUALIFIED
PERSONNEL