2N Omega 48 - Operator Services v1.0 - Manual (Page 15)

2N
®
- OMEGA 48
Operator services
Users Manual - Operator services
www.2n.cz
14
To designate the current call with a job number:
You are talking with somebody and want to designate the call with the
job number.
With a tone telephone set:
Press ‘FLASH’ or ‘R’ into the call.
xxxx
Dial ‘#73xxxx’, where xxxx is a four-digit number related to the call.
Go on talking. The call will be designated with the selected job
number in the telephone bill.
With a pulse telephone set:
xxxx
Dial ‘773xxxx’, where xxxx is a 4-digit job number related to the call.
Go on talking. The call will be designated with the selected job
number in the telephone bill
If you start conversation in a call designated with job no. xxxx and wish to re-
designate the call with job no. yyyy later, a part of the call will be debited to job xxxx
and the remaining part of the call to job yyyy.
Job „xxxx“ Job „yyyy“
Call designated
with job no. xxxx at
the beginning
Call designated
with job no. yyyy
during the call