2N Omega 48 - Operator Services v1.0 - Manual (Page 33)

2N
®
- OMEGA 48
Operator services
Users Manual - Operator services
www.2n.cz
32
2.15. DISA Service
Your 2N OMEGA 48 PBX is equipped with the DISA tone dialing. The DISA service
can be disabled and programmed from one or more CO lines. With the DISA
service, the calling party on the CO line can:
•
get through to the required internal subscriber (dial directly in his extension);
•
get connected with somebody (the first free subscriber) of departments 1, 2, 3, 4,
5, or 6;
•
get through to the PBX operator directly;
•
leave a voice message in the internal subscriber’s voice mail box;
•
send a fax message to the internal subscriber’s fax box;
•
control the PBX relay;
•
retrieve messages from its „answering and recording machine“.
To use the DISA service, you have to be equipped with a tone-dialing telephone set.
To dial an internal subscriber directly or leave a voice or fax message:
r...r
You (or your customer) can pick up a handset anywhere in the
world and call your 2N OMEGA 48 PBX.
The PBX welcomes you with a DISA greeting voice message (you
can record the DISA message yourself).
nn
You can now dial the required internal subscriber number just by
switching your telephone set into the tone-dialing mode and dialing
nn, where nn is the line number of the internal subscriber to be
called, or
or
dial ‘10’ or ‘20’ or ‘30’ or ‘40’ or ‘50’ or 60’ to get through to
somebody (the first free subscriber) of the department 1, 2, 3, 4, 5,
or 6, or
or dial ‘9’ to get through to your PBX operator, or
or
nn
dial ‘7nn’, where nn is the number of the internal subscriber in
whose voice/fax mail box you want to leave a message/fax
message.
The internal subscriber’s telephone set will be ringing for a pre-set period of time. If
the subscriber fails to answer the call within this time, the PBX will make those
subscriber lines ring that would ring if the DISA service was not activated. You (or
your customer) can hear the ringing tone for the whole time.
If your customer does not know or does not use the DISA service, the PBX will
process the incoming call normally.