2N Omega 48 - StarPoint 500 - manual v2.0 - Manual (Page 5)

2N OMEGA 48
2N StarPoint 500
User‘s Manual
5
www.2n.cz
Connect the receiver to the telephone set using the twisted cable (from the bottom –
see the figure below)
Connect the telephone set to your telephone socket using the telephone cord
supplied. Note: The 2N StarPoint 500 telephone can only be connected to the
dedicated socket.
Button name tags
For automatic name tag creation use the PbX Configuration Tool: on the button
settings screen click the “Prepare for printing” button. After clicking this button, the
pre-filled out print template will be created automatically.
You can also use the empty template included in the telephone set package to
create name tags for the predefined programmable buttons.
For more information on button setup refer to chapter Telephone Setup.
1.3 Accessories
The 2N StarPoint 500 telephones can be enhanced with optional user comfort
accessories such as additional button modules, headsets, etc. The additional
accessories are to be connected from the bottom of the telephone set.
To add more buttons, you can add an assistant console (button KEY module) or an
operator console (button BLF module) to your 2N StarPoint 500 Standard and
Advance. By connecting these consoles serially you will obtain a large number of
additional buttons. All buttons on the consoles can be set up in the same manner as
the telephone programmable buttons.