2N Omega 48 - StarPoint 500 - manual v2.0 User Manual
Page 8
2N OMEGA 48
2N StarPoint 500
User‘s Manual
8
Telephone display
All 2N StarPoint 500 telephones (except for the Entry model) are equipped with a
two-row display. The display contract can be adjusted. For description of the display
parameter setup refer to chapter.
Default display status:
For more comfort when using the 2N StarPoint telephone you may tilt the display.
Programmable buttons
2N StarPoint 500 telephones are equipped with buttons, which are user-
programmable in the environment of the PbX configuration tool. The basic setup of
the programmable buttons is made after the so-called Hardware RESET if the
telephone set was connected to the system and also by the system administrator;
the user may adjust the button setting according to his/her needs. For more
information see chapter Programmable Buttons Setup.
Basic available functions of the programmable buttons:
Flash (call interruption for transfer,..)
Transfer (transfer, intercom to assistant)
Hands-free/one-way hands-free
Mute (microphone switch-off)
Redial / List of outgoing calls
List of personal quick-dial numbers
List of missed calls
DND (rejection of a call to the assistant)