2N Helios IP Safety - Manual (Page 23)

23
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.3 Electric Installation
This subsection describes how to connect into your Local Area 2N
®
Helios IP Safety
Network (LAN) and how to connect supply voltage and the electric lock.
PCB Connectors
Picture shows the lay-out of connectors on the printed circuit 2N
®
Helios IP Safety
board (PCB). Cables, accessories and other system components are connected to
connectors X1 through X22.
Connectors, PCB Version 555v2 Figure: 2N
®
Helios IP Safety