Ip address retrieval, Switching between static and dynamic ip address – 2N Helios IP Safety User Manual
Page 34
34
IP Address Retrieval
Take the following steps to retrieve the
IP address:
2N
®
Helios IP Safety
Connect (or, if connected, disconnect and reconnect)
to
2N
®
Helios IP Safety
the power supply.
Wait for the second sound signal
.
Press the quick dial button 5 times.
2N
®
Helios IP Safety will read its IP address.
If the address is 0.0.0.0, it means that the intercom has not obtained the IP
address from the DHCP server.
Switching between Static and Dynamic IP Address
Connect
to the power supply (or, disconnect and
2N
®
Helios IP Safety
reconnect it if already connected).
Wait for the first acoustic signal
.
Press
button 15 times.
the quick dial
The acoustic signal
indicates mode switching.
Wait until the device is restarted automatically.
Note
Be sure to press the button sequence within thirty seconds after the
sound signal for security reasons. Up to 2 s intervals are allowed between
the presses.