2N Helios IP Configuration Manual v2.8 - Manual (Page 85)

85
2N TELEKOMUNIKACE a.s., www.2n.cz
®
List of Parameters
Ringing before answering call – set the sound to be played before answering
an incoming call (intercom ring tone).
Call busy tone – set the sound to be played when the called user is busy.
Call hang-up signalling – set the sound to be played upon the call end.
Invalid input signalling – set the sound to be played when an invalid code in
entered (switch/user/profile activation).
Invalid position signalling – set the sound to be played when a quick dial
button is pressed but the corresponding Phone Book position is not programmed.
Switch activation signalling – set the sound to be generated when a switch is
activated. Specify signalling details for each switch; refer to the Switches
subsection.
You can record up to 10 user sound files into the intercom and assign names to them
for convenience.
Press to record a sound file to the intercom. Select a file from your PC via a
dialogue window and push . Press to remove a file. Press to replay the Record
sound file (locally on your PC).