2N Attendance System v1.0 User Manual
Page 19
19
Service Settings
Figure:
Database Connection Settings
Here set the login data for authentication of the
user. The
2N
®
Attendance System
following parameters are available:
Server address – set the address of the PC on which login via the web interface
will be made. The options are IP address or domain name.
Initial catalogue – set the name of the database for the 2N
®
Attendance
communication.
System
Login – set the user name to authenticate the user access to the 2N
®
database.
Attendance System
Password – set the password to authenticate the user (system administrator)
for communication with the database generated by the 2N Helios IP Manager
®
.
– select the checkbox to use the
user login data for
Use system login
Windows
database access. Unselect the checkbox to use the login data defined on this tab
(
,
).
Login Password
Show password – If ticked, the password will be visible. If unticked, the
password will be shown only as dots.
Database Connection Settings
Figure: