4 log – 2N Attendance System v1.0 User Manual
Page 34
34
3.2.4 Log
The
tab provides information on
the access card was applied,
(
Log
when
who card
) used the card and on which
the card was tapped. You can filter the records
ID
device
using a
below the information table. The users assigned to the
filter
2N Attendance
®
database are displayed on this tab only. Refer to
System
for details on user database generating. The table includes the
following columns:
Time – shows when the user access card was applied.
User – displays the user name assigned to the card ID.
Card number – displays the ID of the card applied.
Device – identifies the device type on which the card was tapped: 2N Helios
®
and
. The intercoms must
IP Vario, 2N Helios IP Force
®
2N Helios IP Verso
®
be equipped with card readers.
View of
Tab
Figure:
Log
Note
If more records are included in the system, use the controls below the
table to switch between pages.