2N VoiceBlue Next v3.5 - Manual (Page 56)

56
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Prefixes
The window helps you adapt the gateway to calling to variable GSM networks. You can
set the prefix-based call routing rules here and identify up to eight different groups for
routing.
Prefix list 1–8
Eight prefix groups to be assigned in the LCR table.
Basic settings
GSM network ID – name the prefix list for convenience.
Default count of digits – the default length of the number to be dialled into
GSM/UMTS when routing via the selected prefix list. Use this parameter if the
parameter is not included in the table. Digits count Accepted prefixes
Table of replaced prefixes
This table helps you change the prefix of the number received (from 00 to +, e.g.). You
can just add or remove a prefix using this table. This change is performed before the
prefix table search is initiated. Keep the „"/ „" record at least in the table for a proper
function.
Table of accepted prefixes
A list of prefixes of called destinations to which the selected prefix list applies.
Note
The number to be dialled to the GSM/UMTS network must meet the
condition. Count of digits
For
calls, the count of digits to be dialled must be equal to or higher VoIP
than the value set in the . Count of digits
Note
The maximum count of records in the is 14 Table of replaced prefixes
for each prefixlist.
The maximum table record size is 9 characters for the prefix and 9
characters for the replaced number.
Note
The maximum count of records in the is 138 Table of accepted prefixes
for each prefixlist.
The maximum table record size is 9 characters.