Order of steps during commissioning, 3 order of steps during commissioning – ADS-TEC VMT7010/7012/7015 User Manual
Page 20
VMT7010/VMT7012/VMT7015
19
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
4.3 Order of steps during commissioning
Removing the lid from the service slot
Loosen the undetachable screws on the service slot cover by using a Torx Tx10 screw driver and
subsequently remove the service slot cover from the device.
Fig. 8:
Connecting the cables
Please connect all required cables. Always use the grommets to correctly install the cables.
Information:
A cable installation kit, which includes grommets for several cable diameters,
is available as an option.
Pos : 19 /D atent ec hni k/I nbetri ebnahme/ Betriebsberei tschaf t prüf en/ Betriebsbereit schaf t prüf en f ür O PC/C PC/ PLC /OTC /ITC/ VMT-Serie(+Monit ore) / I PC 5100/ 5500/ 2400/1100 @ 0\ mod_1158905578361_6. doc @ 381 @