ADS-TEC VMT7010/7012/7015 - Manual (Page 38)

VMT7010/VMT7012/VMT7015 37
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
7 Drives
The storage medium is selected according to the customer requirements. The following options are
available for storage:
mSATA Flash:
A flash with a storage capacity of at least 1GB is used.
Its capacity depends on the desired operating system and the additional programmes to be installed.
Hard disk/SSD:
A 2.5" hard disk with at least 80 GB (SATA) capacity is used.
The device can alternatively be equipped with an SSD. Its capacity depends on the desired operating
system and the additional programmes to be installed.
Information:
Recommendation for the choice of storage medium with a basic installation:
Flash memory: Windows XP embedded / Windows 7 embedded
Hard disk: Windows XP Professional / Windows 7 Ultimate
Pos : 35 /D atent ec hni k/Lauf wer ke/Exter ne Lauf werke/ Ext er ne Lauf wer ke für OPC 5112 / 5115 / 5117 / I PC 1100 / CPC / PLC / OTC / ITC / VMT-Serie @ 0\ mod_1158926656205_6. doc @ 563 @
External drives:
The device includes no drive for removable media (CD/floppy).
Instead, the system provides a USB interface, to which an external drive can be connected. In this case
you'd have to ensure that the used device is suitable for industrial environments.
ATTENTION
Connecting or disconnecting external drives
during operation is not admissible, since it cannot
be excluded that the drive might be in use while
connecting or disconnecting it. Data loss might
result in the event of non-compliance!
Pos : 36 /D atent ec hni k/Sof t war e / Trei ber Install ati on/I nst allati on des Betriebss ystems/I nst allation des Berti