ADS-TEC RAC2000 User Manual - Manual (Page 15)

RAC2000 series 14
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
4 System Features
4.1 General LED Status
The status of different interfaces is shown by the integrated LEDs. This allows the device status to be diagnosed
directly at the place of use. The available device status displays are shown in the overview.
LED Status representation
off
green
gren flashing
red
orange
orange flashing
Note:
Subsequently described LED displays are abbreviated as follows:
Left‐hand LED = LINK (readiness for operation)
Right‐hand LED = ACT (activity)