ADS-TEC RAC2000 User Manual - Manual (Page 16)

RAC2000 series 15
© ads‐tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden‐Echterdingen
4.1.1 PWR / CUT & ALARM / VPN 3G
Abb. 3:
WLAN (1) / (2) Signal Action
Left LED Link Device is searching for available WLAN
networks.
Left LED Link Device is iconnected t to WLAN
network
Right LED ACT There is no traffic between the device
and the remote station
Right LED ACT Displays the traffic between the device
and remote.
HOST Signal Action
Left LED Link The interface is not connected to a
remote station
Left LED Link The interface is connected to a remote
site and is ready for use
Right LED ACT There is no traffic between the device
and the remote station
Right LED ACT Displays the traffic between the device
and remote.
POWER Signal Action
The device is not powered
The device is supplied with power via
Power and is ready
The device has a fatal firmware error.
Its can only be solved by ads‐tec