AirLive AirMax5N-ESD - Manual (Page 15)

2. Installing the AirMax5N
AirLive AirMax5N/ESD User’s Manual
9
2
2.
Installing the AirMax5N
This section describes the hardware features and the hardware installation procedure for
the AIRMAX5N. For software configuration, please go to chapter 3 for more details.
2.1 Before You Start
It is important to read through this section before you install the AirMax5N
The AirMax5N comes with everything you need to start installation with exception
of the PoE Ethernet Cable. You can use a good quality CAT-5E outdoor graded
Ethernet cable (shielded with anti-UV) according to the length you need.
The AirMax5N must be installed in the upright position if the unit is located in
outdoor or wet environments.
The use of 5GHz spectrum, the allowed channels can be very in different country.
Please consult with your country’s telecom regulation first.
The integrated antenna has forward coverage angle of 20 degree in vertical and
30 degree in horizontal direction.
The AirMax5N is a 5GHz CPE device only; it cannot operate in 2.4GHz.
If you choose to use the external antenna, please remember to connect the
external antenna first before power on AirMax5N.