AirLive AirMax5N-ESD - Manual (Page 8)

1. Introduction
AirLive AirMax5N/ESD User’s Manual
2
1.3 How to Use This Guide
AirMax5N is an advanced wireless CPE with many functions. It is recommended that you
read through the entire user’s guide whenever possible. The user guide is divided into
different chapters. You should read at least go through the first 3 chapters before
attempting to install the device.
Recommended Reading
Chapter 1
1.5 Operation Modes:
This section explains the usage of each wireless operation mode. It is a must
read.
Chapter 2:
This chapter is about hardware installation. You should read through the entire
chapter.
Chapter 3:
3.1 Important Information: This section has default settings information
such as IP, password, SSID, and recommended browser
3.3 Management Interface: This section introduces Web, Telnet, and
configurations.
3.4 Introduction to Web Management: This section tells you how to get into
the Web UI using HTTP. In addition, it also explains about the basic menu
structure.
3.5 Initial Configurations: This section guide you through the essential initial
configurations such as choosing operation mode, set device IP, password,
and change frequency domain.
Chapter 4 Web Management – Wireless and WAN Settings:
This chapter explain the wireless functions and router mode settings in the
AirMax5N. If time permitted, you should read through the entire chapter.
4.2 Operation Mode (wireless):
Operation mode is the page where all the wireless settings and router mode
settings are. Therefore, it is advised that you must read through the entire
section.
4.2.3 Site Survey:
Site Survey is the connection wizard that will search for available
networks and let you connect with the select network by simply clicking. It
also includes RSSI signal survey for antenna alignment.
4.2.5 and 4.2.6 Channel and Channel Width:
This part explains the concept of variable Channel Width and how to use
them. Channel Width can be 40MHz, or 20MHz.
4.3 WDS Settings:
Here explains the WDS setting page.