AirLive AirMax5N-ESD - Manual (Page 68)

6. Antenna Alignment
AirLive AirMax5N/ESD User’s Manual
62
Step 1 Go to the Sit Survey function
Step 2 Check the Signal Strength of the desired AP. For identify the AP quicker, we
suggest you to written the MAC address of the desired AP and using the MAC to
filter out your target.
Step 3 If the Signal Strength is too weak to make a connection, please adjust the
antenna.
Step 4 Refresh the Site Survey page and check the Signal Strength again.
Step 5 Once the Signal is good enough, please check the radio box in front of the desired
AP and then click on the ASSOCIATE button for building the connection.