AirLive AirMax5N-ESD - Manual (Page 47)

4. Web Management-Wireless and WAN Settings
AirLive AirMax5N/ESD User’s Manual
41
To configure, please click on the “Bandwidth Control” button under wireless settings. The
following screen will appear:
Enable: Seleck to enable Bandwidth Control. The default value is disabled.
Local IP Address: Fill in the local IP address
Uplink Bandwidth: Input uplink Maximum upload bandwidth
Downlink Bandwidth: Input downlink Maximum upload bandwidth.
4.3 WDS Settings
Operation Mode -> Setup -> WDS Settings
WDS Bridge mode can make Point-to-Point and Multi-Point connections. Because of its
faster performance, it is frequently used to build point-to-point bridge connection and
backbone networks. In a WDS network, each node can have up to 4 connections. However,
the total number of devices in a WDS network should not exceed 8.
In this section, we will talk about the WDS Settings which is available only in WDS Bridge
mode. WDS Bridges are using BSSID (AP’s Wireless MAC address) to authenticate each
other. Therefore, it is necessary to know the remote Bridge’s wireless MAC addresses. You
can always do a “Site Survey” to find out the MAC Addresses.
When you click on WDS settings, the following screen will appear: