AirLive CW-720 - Manual (Page 51)

4. Monitor the Image Section
AirLive CW-720 User’s Manual 46
Backup Setting:
To take a backup of all of the parameters, click this button. If necessary, it will then be
possible to return to the previous settings, if settings are changed and there is unexpected
behavior.
Restore Setting:
Click the “Browse” button to locate the saved backup file and then click the “Restore
Setting” button. The settings will be restored to the previous configuration.
Firmware Upgrade:
The device supports new firmware upgrade (the software that controls the operation in the
device). Please contact your dealer for the latest version if necessary.
Download the latest firmware file from our website or your dealer. Unzip this firmware file to
binary file and store it into your PC. Then follow the steps as bellows carefully:
1. Close all other application programs which are not necessary for firmware update.
2. Make sure that only you access this device while firmware updating.
3. Disable Motion Detection function.
4. Click “Browse” button. Select the Firmware binary file.
(Note that it must make sure that the Firmware only applies to this device, once update, it
will be burned into FLASH ROM of system.)
5. Once the firmware file was selected, click “Firmware Upgrade” button.