AirLive CW-720 - Manual (Page 50)

4. Monitor the Image Section
45 AirLive CW-720 User’s Manual
NTP sync. Interval: Select an interval between 1 and 23 hours at which you want to
adjust the device’s time referring to NTP server
Time zone:
Set the time difference from Greenwich Mean Time in the area where the device is
installed.
Daylight Saving:
Disable or enable the daylight saving adjustment.
4.4.3 Maintenance
Hard Factory Default (Include the network setting):
Recall the device hard factory default settings. Note that click this button will reset all
device’s parameters to the factory settings (including the IP address).
Factory Default (Except the network setting):
The unit is restarted and most current settings are reset to factory default values. This
action will not reset the network setting.