AirLive CW-720 - Manual (Page 33)

4. Monitor the Image Section
AirLive CW-720 User’s Manual 28
Note: To enable WLAN function, a user must set these related parameters correctly at first.
Then, power off the device and remove Ethernet cable from device. Power on the device
again and WLAN mode will be available accordingly.
4.2.3 IPv6
IPv6: To enable or disable the IPv6 service here.
The IP communication protocol used for current Internet is having the problem of
insufficient IP addresses. The one-for-all solution is the new-generation internet protocol,
IPv6. IPv6 has 16-byte long address space, offering a huge number of addresses, and also
provides better scalability, quality of service, mobility, and security to the network.
4.2.4 HTTPS
HTTPS: Stands for Hypertext Transfer Protocol Secure
HTTPS is a combination of the Hypertext Transfer Protocol with the SSL/TLS protocol to
provide encrypted communication and secure identification of a network web server.
HTTPS connections are often used for sensitive transactions in corporate information
systems. The main idea of HTTPS is to create a secure channel over an insecure network.
This ensures reasonable protection from eavesdroppers and man-in-the-middle attacks,
provided that adequate cipher suites are used and that the server certificate is verified and
trusted.