Brady PAM 3000 - Manual (Page 36)

Printer-Applicator-System PAM 3000 36
ONL key Switch into ONLINE mode (LED ONL on)
FF key Provides label feed. The leading edge of the next label to be printed is in print
position.
CAN key Switch into LABEL FROM CARD mode.
(only if memory card is installed and formats are stored on it)
PSE key Display shows printer info display (information about printer settings)
System Mode OFFLINE
CAN key short pressing : Cancels the current print job,
Switch to the next job in the input buffer
longer pressing (>1s): Cancels the current print job,
Deletes the input buffer (LED CAN blinks),
Switch into ONLINE mode
PSE key Interrupts the current print job,
Switch into PAUSE mode (LED PSE on)
System Mode PRINT
FF key Provides label feed. The leading edge of the next label to be printed is in print
position.
CAN key short pressing : Cancels the current print job,
Switch to the next job in the input buffer
longer pressing (>1s): Cancels the current print job,
Deletes the input buffer (LED CAN blinks),
Switch into ONLINE mode
PSE key Continues the current print job,
Switch into PRINT mode (LED PSE off)
System Mode PAUSE
System Mode LABEL FROM CARD
ONL key Switch into OFFLINE mode
FF key For scrolling down within the file list stored on the card
Reduces the quantity of labels to be printed
CAN key For scrolling up within the file list of the card
Increases the quantity of labels to be printed
PSE key Confirms file selection
Moves the cursor to the right when setting the quantity of labels to print
Switch into PRINT mode