Brady PAM 3000 - Manual (Page 52)

Printer-Applicator-System PAM 3000 52
Printing from a Memory Card
NOTICE !
Using a memory card provides the opportunity to print without a connection of
the printer to a computer.
Follow the instructions below, after the card has been installed and the printer has
been switched ON :
1. Switch printer into OFFLINE mode by pressing the key.
2. After pressing the key, the file name of the first label saved on the card will be
shown.
3. Using the key and the key, you may scroll up and down the contents of the
card. Confirm the selection by pressing the key.
4. If you have chosen a label with a set number of labels to print, the printer will instantly
start printing.
5. For labels with a variable number of labels, the top line of the display shows "Number
of labels", the bottom line shows "00001" with the first figure flashing (cursor).
Using the key and the key, the figure at the position of the cursor may be
altered. By pressing the key the cursor can be moved on to the next figure. After
confirming of the last figure, the printer starts to print.
6. To pause the selection of a label or the input of the number of labels you may press
the key.
The data saved on the card are also accessible via interface and computer.